|
Результат вывода команды show version:
#show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA4a, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 16-Sep-05 10:46 by yenanh
Image text-base: 0x80010000, data-base: 0x80562000
ROM: Bootstrap program is C2950 boot loader
Switch uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-22.EA4a.bin"
cisco WS-C2950T-24 (RC32300) processor (revision R0) with 21039K bytes of memory.
Processor board ID FCZ0945W0DZ
Last reset from system-reset
Running Enhanced Image
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:15:F9:83:18:40
Motherboard assembly number: 73-6114-10
Power supply part number: 34-0965-01
Motherboard serial number: FOC094212W9
Power supply serial number: PHI092307GX
Model revision number: R0
Motherboard revision number: A0
Model number: WS-C2950T-24
System serial number: FCZ0945W0DZ
Configuration register is 0xF
1. Коммутатор WS-C2950T-24 имеет интерфейсы:
FastEthernet0/1 - FastEthernet0/24 работают как порты коммутатора. На эти порты IP можно назначить только через vlan
GigabitEthernet0/1 - GigabitEthernet0/2 работают как порты коммутатора. На эти порты IP можно назначить только через vlan
2. По DHCP чистая конфигурация, в отличие от 831, не захотела получать IP-адрес.
3. Последовательность команд после erase startup-config и reload:
#enable
#conf t
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
hostname c2950-a.b.0.253
aaa new-model
aaa authentication login default local
aaa authorization exec default local
enable secret ...
enable password 7 ...
username admin privilege 15 secret 5 ...
ip subnet-zero
interface range fastEthernet 0/1 - 24
switchport access vlan 50
switchport mode access
mls qos trust dscp
no ip address
no cdp enable
spanning-tree portfast
exit
interface range GigabitEthernet0/1 - 2
switchport access vlan 50
switchport mode access
mls qos trust dscp
no ip address
no cdp enable
spanning-tree portfast
exit
interface Vlan1
no ip address
no ip route-cache
shutdown
exit
interface Vlan50
ip address a.b.0.253 255.255.240.0
no ip route-cache
exit
ip default-gateway a.b.0.254
ip http server
logging source-interface Vlan50
access-list 8 permit a.b.100.77
snmp-server community cisco RW 8
!тут можно вставить контактный email
!snmp-server contact address@domain.com
snmp-server host a.b.100.77 keyword_snmp
line con 0
line vty 5 15
#end
#write
#conf t
#vtp mode server
#vtp domain vtp_domain_name_here
#exit
#write
4. Нужно после заливки конфига перезагрузить коммутатор и проверить правильность установки vtp командой:
|
